PVC EDGES
Thermoplastic edges in rigid PVC with high scratch resistance. They have a good surface hardness and a low tendency to whitening in the machining process.
The surface of the printed edging is protected with a varnish that is highly resistant to scratches and solvents.
They have no tendency to linear shrinkage at temperatures below 75°C.
ABS CHANTS
High-performance ABS thermoplastic edges with good surface hardness. The printed edges are protected with a varnish with excellent scratch and solvent resistance. They are also resistant to low temperatures.
Optimum thermo-resistance, with no tendency to linear shrinkage at temperatures below 97ºC.
Merino Componentes creates and updates the corresponding technical and safety sheets for each type of product, which are based on the results achieved through tests carried out jointly with accredited external corporations.
ANTI-NOISE EDGES FOR RAISED FLOOR
Thermoplastic edging made of modified styrenic material with additives that make it self-extinguishing. They have no tendency to linear shrinkage at temperatures below 87ºC.
Considering the characteristics of self-extinguishing and its low brittleness and its anti-noise formulation, it is used with excellent results for the manufacture of floating floorboards.
TWO-LAYER MELAMINE EDGEBANDING
Printed and unicoloured edges impregnated with thermoplastic and thermosetting resin which gives good application qualities combined with excellent surface hardness and thermal dimensional elasticity.
The surface is characterised by good scratch and solvent resistance. No tendency to thermal dimensional shrinkage. Excellent resistance to sunlight in glazed areas. The product is free of electrostatic charge and does not attract dust.
